How to Install an OS from ISO in SolusVM 2

SShaltai-Boltai April 26, 2026 2 min read 0 views

Installing an OS from an ISO image allows customization, such as partition editing and other options. Follow the steps below to install an OS using an ISO image in SolusVM 2.


1. Log in to your SolusVM 2 Control Panel.

2. Under Projects, click on the project that contains your VPS.

3. Click on the appropriate VPS.


4. Go to Boot & Rescue and choose Boot from ISO Image.


5. Choose the ISO image from the drop-down menu, then click Apply.

6. Scroll down and click Apply. Then click OK to confirm. Wait a few moments for the server settings to update.

7. Click on Restart located at the top right side, then click Yes to reboot.


8. Click on the VNC dialog icon.


9. The VNC page will open. Press ESC to open the boot menu, then enter 1.


10. Most operating systems ask you to press any button to start an OS installation while booting. When prompted, press any key on your keyboard, and the OS installation will begin. It may also show you an option such as Install OS or Test this media. For an OS installation, select Install OS and press Enter.


Once the installation starts, it will ask you to create a partition, set a password, etc.


After the installation is complete, go to Boot & Rescue, select Boot from Disk, click Apply, and reboot the VPS. Otherwise, it will boot into installation mode instead of normal mode.

//RELATED ARTICLESALL ARTICLES →
April 26, 2026 2 min read 0

How to Change the VPS Root/Admin Password in SolusVM 2

You can change the root/admin password of your VPS Operating System using SolusVM 2.1. Log in to your SolusVM 2 Control Panel. 2. Under Projects, click on the project that contains your VPS. 3. Click on the appropriate VPS. 4. Go to the Boot & Rescue tab. 3. Click Reset Root Password, then cl...

SShaltai-Boltai Read more
April 26, 2026 2 min read 0

How to Reinstall an OS Using SolusVM 2

You can easily Install/Reinstall the operating system using SolusVM 2. However, note that this option will destroy all the data on your VPS.1. Log in to your SolusVM 2 Control Panel. 2. Under Projects, click on the project that contains your VPS. 3. Click on the appropriate VPS. 4. Click on Reins...

SShaltai-Boltai Read more
April 26, 2026 2 min read 0

How to Access VPS via VNC in SolusVM 2

You can access your VPS via VNC in an emergency, such as when a firewall blocks your IP, the Internet connection on the VPS is not working, and when you cannot access SSH. Also, you can use VNC for OS installation/reinstallation.1. Log in to your SolusVM 2 Control Panel. 2. Under Projects, click ...

SShaltai-Boltai Read more
April 26, 2026 2 min read 0

How to Change the SolusVM 2 Control Panel Password

If you can access your SolusVM 2 VPS control panel, you can easily change your SolusVM 2 password. We recommend changing your password regularly to maintain account security.1. Log in to your SolusVM 2 Control Panel. 2. Click on Account in the left-hand sidebar. 3. Under Account, enter the follow...

SShaltai-Boltai Read more